HSE.myUser Guide

HSE.my · PUBLIC USER GUIDE

Safety assurance & improvement

Report signals, control risk, investigate, improve and verify that work is safe.

Search by function, activity, role or workflow action.

Browse by operating domain

SAFETY

Safety assurance & improvement

Report signals, control risk, investigate, improve and verify that work is safe.

Typical authorized rolesReporter, Supervisor, Safety Officer, HSE Manager, Investigator, Action Owner and Independent VerifierExact access is controlled by the organization’s RBAC configuration and organization-unit scope.

01 · SAFETY

Import hazards from the HIRARC Library

Open Safety → HIRARC → HIRARC Library. Choose an activity that matches the work you will assess.

  1. Search by activity or industry. Review the hazards, consequences and suggested controls. Select the applicable hazards and choose Use in HIRARC.
  2. Choose an assigned organization unit and create the draft. The source activity and its version stay linked to your assessment.
  3. Open each imported hazard. Describe the controls actually in place at the site, review initial and residual likelihood (L) and severity (S), and check the calculated risk (R = L × S). Record any additional controls still needed.
  4. Confirm the site assessment and submit for review. The assigned reviewer checks the assessment and control evidence before approval. If a hazard changes, review its rating again.
Desktop · Find the activity and select relevant hazards
Desktop · Find the activity and select relevant hazards
Desktop · Search activities and filter by industry
Desktop · Search activities and filter by industry
Mobile · Search activities and filter by industry
Mobile · Search activities and filter by industry
Site assessment · Review the copied ratings and actual controls
Site assessment · Review the copied ratings and actual controls
DESKTOPChoose the category from the rail → open a module register → select Open workspace.
MOBILETap More → search/select a module → open the register or workspace.
CONTROLOpen the current step → complete outstanding details and evidence → use the next permitted action. Save & submit shortcuts retain the same checks.
01 SAFETYSafety CommitteeSchedule meetings, minute decisions and track agenda actions to effectiveness.

Working steps

  1. Manage committee appointments, meeting particulars, agenda, minutes, decisions and action follow-up.
  2. Record quorum and sign-offs; link formal corrective work to CAPA.
  3. Print controlled meeting minutes and retain the audit trail.

Authorized role examples

Reporter, Supervisor, Safety Officer, HSE Manager, Investigator, Action Owner and Independent Verifier. Roles must be active and scoped to the relevant organization unit.

Example scenario

Example: A site needs to schedule meetings, minute decisions and track agenda actions to effectiveness The authorized user opens Safety Committee, completes the controlled record and follows the required workflow.

Before you start

Open Safety Committee in your signed-in workspace.

Standard package access · Essential, Professional, Enterprise. Your assigned permissions, site scope and any active promotion also apply.

Required form details · Organization Unit, Title, Description, Committee, Meeting date and time, Venue, Required quorum.

Actions by status and role

These examples use the training workflows. Check the current step on your own record for the available decisions.

  • Agenda Issued → Confirm and start meeting

    Committee Chair.

    Complete the declaration. After confirmation the record moves to Meeting In Progress.

    Next eligible roles · Committee Secretary. Open the new current step to see the assigned action.

  • Agenda Issued → Reschedule

    Committee Secretary.

    Enter the reason for the decision. After confirmation the record moves to Rescheduled.

    Next eligible roles · Committee Secretary / HSE Manager / Committee Chair. Open the new current step to see the assigned action.

  • Cancelled → Archive cancelled meeting

    HSE Manager / Management Approver.

    Enter the reason for the decision. Complete the declaration. After confirmation the record moves to Archived.
  • Closed → Archive meeting

    HSE Manager / Management Approver.

    Enter the reason for the decision. Complete the declaration. After confirmation the record moves to Archived.
  • Draft → Cancel meeting

    Committee Secretary / HSE Manager.

    Enter the reason for the decision. After confirmation the record moves to Cancelled.

    Next eligible roles · HSE Manager / Management Approver. Open the new current step to see the assigned action.

  • Draft → Schedule meeting

    Committee Secretary.

    Complete the declaration. After confirmation the record moves to Scheduled.

    Next eligible roles · Committee Secretary / HSE Manager / Committee Chair. Open the new current step to see the assigned action.

  • Follow-up → Close meeting

    Independent Verifier / Management Approver.

    Complete the declaration. After confirmation the record moves to Closed.

    Next eligible roles · HSE Manager / Management Approver. Open the new current step to see the assigned action.

  • Meeting In Progress → Prepare minutes

    Committee Secretary.

    Complete the declaration. After confirmation the record moves to Minutes Draft.

    Next eligible roles · Committee Secretary. Open the new current step to see the assigned action.

  • Minutes Approved → Start follow-up

    Committee Secretary / HSE Manager.

    Complete the declaration. After confirmation the record moves to Follow-up.

    Next eligible roles · Independent Verifier / Management Approver. Open the new current step to see the assigned action.

  • Minutes Draft → Submit minutes for review

    Committee Secretary.

    Complete the declaration. After confirmation the record moves to Minutes Review.

    Next eligible roles · Independent Verifier / Management Approver / HSE Manager. Open the new current step to see the assigned action.

  • Minutes Review → Approve minutes

    Independent Verifier / Management Approver.

    Complete the declaration. After confirmation the record moves to Minutes Approved.

    Next eligible roles · Committee Secretary / HSE Manager. Open the new current step to see the assigned action.

  • Minutes Review → Record HSE review

    HSE Manager.

    Complete the declaration. After confirmation the record moves to Minutes Review.

    Next eligible roles · Independent Verifier / Management Approver / HSE Manager. Open the new current step to see the assigned action.

  • Minutes Review → Return minutes

    HSE Manager.

    Enter the reason for the decision. After confirmation the record moves to Returned.

    Next eligible roles · Committee Secretary. Open the new current step to see the assigned action.

  • Rescheduled → Cancel meeting

    Committee Secretary / HSE Manager.

    Enter the reason for the decision. After confirmation the record moves to Cancelled.

    Next eligible roles · HSE Manager / Management Approver. Open the new current step to see the assigned action.

  • Rescheduled → Confirm new schedule

    Committee Chair.

    Complete the declaration. After confirmation the record moves to Scheduled.

    Next eligible roles · Committee Secretary / HSE Manager / Committee Chair. Open the new current step to see the assigned action.

  • Returned → Amend minutes

    Committee Secretary.

    Complete the declaration. After confirmation the record moves to Minutes Draft.

    Next eligible roles · Committee Secretary. Open the new current step to see the assigned action.

  • Scheduled → Cancel meeting

    Committee Secretary / HSE Manager.

    Enter the reason for the decision. After confirmation the record moves to Cancelled.

    Next eligible roles · HSE Manager / Management Approver. Open the new current step to see the assigned action.

  • Scheduled → Confirm and issue agenda

    Committee Chair.

    Complete the declaration. After confirmation the record moves to Agenda Issued.

    Next eligible roles · Committee Chair / Committee Secretary. Open the new current step to see the assigned action.

  • Scheduled → Reschedule

    Committee Secretary.

    Enter the reason for the decision. After confirmation the record moves to Rescheduled.

    Next eligible roles · Committee Secretary / HSE Manager / Committee Chair. Open the new current step to see the assigned action.

Create committee

Open Manage Committees and expand Create committee. Choose the organization unit. Enter the committee name, select its chairperson and secretary, set the appointment dates and enter the terms of reference. Select Create committee.

Desktop · Create committee
Desktop · Create committee
Mobile · Create committee
Mobile · Create committee

Appoint member

Open Manage Members and expand Appoint member. Select the committee and an active organization user. Choose the appointment role, enter the start and expiry dates and describe the responsibilities. Select Appoint member and check that the appointment appears under the correct committee.

Desktop · Appoint member
Desktop · Appoint member
Mobile · Appoint member
Mobile · Appoint member

Create meeting

As the committee secretariat, open Manage Meetings and expand Create meeting. Select the unit and committee, enter the title, description, scheduled time, venue and required quorum, then save the draft. Open the meeting record to continue preparation.

Desktop · Create meeting
Desktop · Create meeting
Mobile · Create meeting
Mobile · Create meeting
Workspace route after sign-in/workspace/safety/committee
Mobile path
  1. Tap Safety in the bottom navigation, or tap More to open the module picker.
  2. Use search in the module picker, then select Safety Committee.
  3. On the register, tap Open Workspace for the record or use New only when your role allows it.
Controlled-record rule

Hard delete is never the normal lifecycle for a controlled record. Once used, submitted, approved, linked, printed or evidenced, use amendment, revision, void, retirement, archive or supersede with a reason.

02 SAFETYHIRARCIdentify hazards, assess risks and establish verifiable controls before work starts.

Working steps

  1. Open Generic HIRARC Library from Knowledge Library or the HIRARC register. All active members, including non-HSE users and Starter, may search activities and select hazards within their assigned unit scope.
  2. Choose hazards and Use in HIRARC. The system creates your own draft with the source version, initial L/S/R and target residual L/S/R. Package record limits still apply.
  3. Complete the actual site location, scope, people exposed and existing controls. Review every preset L/S rating and proposed control; R is calculated as L × S. Describe the site checks and confirm the assessment, then Save & submit for review.
  4. Suggested controls remain planned, not implemented or verified. Residual reductions require independent control verification. Changes to scope, hazards or controls invalidate site confirmation. Original library versions never overwrite tenant assessments.
  5. Continue review and independent approval in the existing HIRARC workspace. Only approved/current assessments can support downstream work authorization.
  6. Define assessment scope, hazards, initial risk, existing/additional controls and residual risk.
  7. Link approved HIRARC controls to JSA, SWP, PTW and CAPA without overwriting source history.
  8. Submit for independent review, approval, revision and controlled print.

Authorized role examples

Risk Assessor/Preparer, HSE Reviewer and Independent Approver.

Example scenario

Example: A site needs to identify hazards, assess risks and establish verifiable controls before work starts The authorized user opens HIRARC, completes the controlled record and follows the required workflow.

Before you start

Open HIRARC in your signed-in workspace.

Standard package access · Starter, Essential, Professional, Enterprise. Your assigned permissions, site scope and any active promotion also apply.

Required form details · Organization Unit, Title, Document revision, Process or activity, Location, Scope, Reference documents, Assessor, Assessment date, Review due.

Actions by status and role

These examples use the training workflows. Check the current step on your own record for the available decisions.

  • Approved → Close

    Independent Verifier / Management Approver / Manager / Independent Reviewer / Organization Administrator.

    Complete the declaration. After confirmation the record moves to Closed.

    Next eligible roles · Independent Verifier / Management Approver / Organization Administrator / Manager / Independent Reviewer. Open the new current step to see the assigned action.

  • Closed → Archive

    Independent Verifier / Management Approver / Organization Administrator.

    Enter the reason for the decision. Complete the declaration. After confirmation the record moves to Archived.
  • Closed → Reopen

    Independent Verifier / Management Approver / Manager / Independent Reviewer / Organization Administrator.

    Enter the reason for the decision. After confirmation the record moves to Draft.

    Next eligible roles · Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Draft → Submit

    Organization Administrator / Safety and Health Officer.

    Complete the declaration. After confirmation the record moves to Submitted.

    Next eligible roles · HSE Manager / Operations / Action Owner / Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Rejected → Archive rejected record

    Independent Verifier / Management Approver / Organization Administrator.

    Enter the reason for the decision. Complete the declaration. After confirmation the record moves to Archived.
  • Returned → Amend and resubmit

    Organization Administrator / Safety and Health Officer.

    Complete the declaration. After confirmation the record moves to Draft.

    Next eligible roles · Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Reviewed → Approve

    Independent Verifier / Management Approver / Manager / Independent Reviewer / Organization Administrator.

    Complete the declaration. After confirmation the record moves to Approved.

    Next eligible roles · Independent Verifier / Management Approver / Manager / Independent Reviewer / Organization Administrator. Open the new current step to see the assigned action.

  • Reviewed → Reject

    Independent Verifier / Management Approver / Manager / Independent Reviewer / Organization Administrator.

    Enter the reason for the decision. After confirmation the record moves to Rejected.

    Next eligible roles · Independent Verifier / Management Approver / Organization Administrator. Open the new current step to see the assigned action.

  • Submitted → Return for amendment

    HSE Manager / Operations / Action Owner / Organization Administrator / Safety and Health Officer.

    Enter the reason for the decision. After confirmation the record moves to Returned.

    Next eligible roles · Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Submitted → Review

    HSE Manager / Operations / Action Owner / Organization Administrator / Safety and Health Officer.

    Complete the declaration. After confirmation the record moves to Reviewed.

    Next eligible roles · Independent Verifier / Management Approver / Manager / Independent Reviewer / Organization Administrator. Open the new current step to see the assigned action.

Desktop · HIRARC
Desktop · HIRARC
Mobile · HIRARC
Mobile · HIRARC
Workflow · Hirarc form
Workflow · Hirarc form
Workflow · Hirarc scope
Workflow · Hirarc scope
Workflow · Hirarc hazard
Workflow · Hirarc hazard
Workflow · Hirarc control
Workflow · Hirarc control
Workflow · Control implementation
Workflow · Control implementation
Workflow · Hirarc submit
Workflow · Hirarc submit
Workflow · Hirarc independent verification
Workflow · Hirarc independent verification
Workflow · Hirarc review
Workflow · Hirarc review
Workflow · Hirarc approval
Workflow · Hirarc approval
Workflow · Hirarc approved
Workflow · Hirarc approved
Desktop · Find the activity and select relevant hazards
Desktop · Find the activity and select relevant hazards
Desktop · Search activities and filter by industry
Desktop · Search activities and filter by industry
Mobile · Search activities and filter by industry
Mobile · Search activities and filter by industry
Site assessment · Review the copied ratings and actual controls
Site assessment · Review the copied ratings and actual controls
Workspace route after sign-in/workspace/safety/hirarc
Mobile path
  1. Tap Safety in the bottom navigation, or tap More to open the module picker.
  2. Use search in the module picker, then select HIRARC.
  3. On the register, tap Open Workspace for the record or use New only when your role allows it.
Controlled-record rule

Hard delete is never the normal lifecycle for a controlled record. Once used, submitted, approved, linked, printed or evidenced, use amendment, revision, void, retirement, archive or supersede with a reason.

03 SAFETYJob Safety AnalysisPlan a task-specific sequence of work, hazards, verifiable controls and briefing before work begins.

Working steps

  1. Plan task steps, hazards, critical controls, evidence/location and worker briefing for one defined job.
  2. Select matching approved HIRARC and SWP; record environmental controls without duplicating their source records.
  3. Approve and brief the exact revision before PTW activation; supersede instead of silently overwriting a used revision.

Authorized role examples

JSA Preparer, Supervisor, Independent Approver and Work Party Member for briefing/sign-on.

Example scenario

Before electrical maintenance begins, the supervisor prepares a JSA linked to the approved electrical HIRARC and SWP, briefs the work party, then the permit can be activated.

Before you start

Open Job Safety Analysis in your signed-in workspace.

Standard package access · Professional, Enterprise. Your assigned permissions, site scope and any active promotion also apply.

Desktop · Start Job Safety Analysis
Desktop · Start Job Safety Analysis
Mobile · Start Job Safety Analysis
Mobile · Start Job Safety Analysis
Workflow · Jsa form
Workflow · Jsa form
Workflow · Jsa step
Workflow · Jsa step
Workflow · Jsa control
Workflow · Jsa control
Workflow · Jsa steps complete
Workflow · Jsa steps complete
Workflow · Jsa readiness
Workflow · Jsa readiness
Workflow · Jsa review
Workflow · Jsa review
Workflow · Jsa approval
Workflow · Jsa approval
Workflow · Jsa approved
Workflow · Jsa approved
Workspace route after sign-in/workspace/safety/jsa
Mobile path
  1. Tap Safety in the bottom navigation, or tap More to open the module picker.
  2. Use search in the module picker, then select Job Safety Analysis.
  3. On the register, tap Open Workspace for the record or use New only when your role allows it.
Controlled-record rule

This register is a controlled entry point/history view. Use the designated workspace to create or maintain the source record.

04 SAFETYTraining and CompetencyPlan internal training, attendance, assessment and competency validity.

Working steps

  1. Create courses and sessions, nominate participants, record attendance and assess outcomes.
  2. Issue and verify certificates, then monitor validity and competency readiness.
  3. Amend, reschedule or cancel only through the controlled session lifecycle.

Authorized role examples

Reporter, Supervisor, Safety Officer, HSE Manager, Investigator, Action Owner and Independent Verifier. Roles must be active and scoped to the relevant organization unit.

Example scenario

Example: A site needs to plan internal training, attendance, assessment and competency validity The authorized user opens Training and Competency, completes the controlled record and follows the required workflow.

Before you start

Open Training and Competency in your signed-in workspace.

Standard package access · Essential, Professional, Enterprise. Your assigned permissions, site scope and any active promotion also apply.

Required form details · Organization Unit, Title, Description, Course, Trainer, Venue, Starts at, Ends at, Capacity.

Actions by status and role

These examples use the training workflows. Check the current step on your own record for the available decisions.

  • Approved → Close

    Independent Verifier / Management Approver / Organization Administrator.

    Complete the declaration. After confirmation the record moves to Closed.

    Next eligible roles · Independent Verifier / Management Approver / Organization Administrator. Open the new current step to see the assigned action.

  • Closed → Archive

    Independent Verifier / Management Approver / Organization Administrator.

    Enter the reason for the decision. Complete the declaration. After confirmation the record moves to Archived.
  • Closed → Reopen

    Independent Verifier / Management Approver / Organization Administrator.

    Enter the reason for the decision. After confirmation the record moves to Draft.

    Next eligible roles · Organization Administrator / Safety and Health Officer / Worker Reporter. Open the new current step to see the assigned action.

  • Draft → Submit

    Organization Administrator / Safety and Health Officer / Worker Reporter.

    Complete the declaration. After confirmation the record moves to Submitted.

    Next eligible roles · HSE Manager / Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Rejected → Archive rejected record

    Independent Verifier / Management Approver / Organization Administrator.

    Enter the reason for the decision. Complete the declaration. After confirmation the record moves to Archived.
  • Returned → Amend and resubmit

    Organization Administrator / Safety and Health Officer / Worker Reporter.

    Complete the declaration. After confirmation the record moves to Draft.

    Next eligible roles · Organization Administrator / Safety and Health Officer / Worker Reporter. Open the new current step to see the assigned action.

  • Reviewed → Approve

    Independent Verifier / Management Approver / Organization Administrator.

    Complete the declaration. After confirmation the record moves to Approved.

    Next eligible roles · Independent Verifier / Management Approver / Organization Administrator. Open the new current step to see the assigned action.

  • Reviewed → Reject

    Independent Verifier / Management Approver / Organization Administrator.

    Enter the reason for the decision. After confirmation the record moves to Rejected.

    Next eligible roles · Independent Verifier / Management Approver / Organization Administrator. Open the new current step to see the assigned action.

  • Submitted → Return for amendment

    HSE Manager / Organization Administrator / Safety and Health Officer.

    Enter the reason for the decision. After confirmation the record moves to Returned.

    Next eligible roles · Organization Administrator / Safety and Health Officer / Worker Reporter. Open the new current step to see the assigned action.

  • Submitted → Review

    HSE Manager / Organization Administrator / Safety and Health Officer.

    Complete the declaration. After confirmation the record moves to Reviewed.

    Next eligible roles · Independent Verifier / Management Approver / Organization Administrator. Open the new current step to see the assigned action.

Training
Training
Workspace route after sign-in/workspace/training/manage
Mobile path
  1. Tap Safety in the bottom navigation, or tap More to open the module picker.
  2. Use search in the module picker, then select Training and Competency.
  3. On the register, tap Open Workspace for the record or use New only when your role allows it.
Controlled-record rule

Hard delete is never the normal lifecycle for a controlled record. Once used, submitted, approved, linked, printed or evidenced, use amendment, revision, void, retirement, archive or supersede with a reason.

05 SAFETYInspectionsPerform item-level scheduled inspections with findings and evidence.

Working steps

  1. Start an inspection from a checklist template. Saving opens the checklist directly; answer criteria using the 0–5 or N/A method.
  2. Attach evidence and location to the applicable question, then create findings and linked CAPA.
  3. Use Environment checklist templates here for new environmental inspections.

Authorized role examples

Inspector, Checklist Template Administrator, HSE/Environment Manager and CAPA Owner.

Example scenario

Example: A site needs to perform item-level scheduled inspections with findings and evidence The authorized user opens Inspections, completes the controlled record and follows the required workflow.

Before you start

Open Inspections in your signed-in workspace.

Standard package access · Starter, Essential, Professional, Enterprise. Your assigned permissions, site scope and any active promotion also apply.

Required form details · Organization Unit, Title, Description, Checklist, Location, Inspection scope, Inspector, Scheduled date.

Actions by status and role

These examples use the training workflows. Check the current step on your own record for the available decisions.

  • Approved → Close

    Independent Verifier / Management Approver / Manager / Independent Reviewer / Organization Administrator.

    Complete the declaration. After confirmation the record moves to Closed.

    Next eligible roles · Independent Verifier / Management Approver / Organization Administrator / Manager / Independent Reviewer. Open the new current step to see the assigned action.

  • Closed → Archive

    Independent Verifier / Management Approver / Organization Administrator.

    Enter the reason for the decision. Complete the declaration. After confirmation the record moves to Archived.
  • Closed → Reopen

    Independent Verifier / Management Approver / Manager / Independent Reviewer / Organization Administrator.

    Enter the reason for the decision. After confirmation the record moves to Draft.

    Next eligible roles · Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Draft → Submit

    Organization Administrator / Safety and Health Officer.

    Complete the declaration. After confirmation the record moves to Submitted.

    Next eligible roles · HSE Manager / Operations / Action Owner / Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Rejected → Archive rejected record

    Independent Verifier / Management Approver / Organization Administrator.

    Enter the reason for the decision. Complete the declaration. After confirmation the record moves to Archived.
  • Returned → Amend and resubmit

    Organization Administrator / Safety and Health Officer.

    Complete the declaration. After confirmation the record moves to Draft.

    Next eligible roles · Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Reviewed → Approve

    Independent Verifier / Management Approver / Manager / Independent Reviewer / Organization Administrator.

    Complete the declaration. After confirmation the record moves to Approved.

    Next eligible roles · Independent Verifier / Management Approver / Manager / Independent Reviewer / Organization Administrator. Open the new current step to see the assigned action.

  • Reviewed → Reject

    Independent Verifier / Management Approver / Manager / Independent Reviewer / Organization Administrator.

    Enter the reason for the decision. After confirmation the record moves to Rejected.

    Next eligible roles · Independent Verifier / Management Approver / Organization Administrator. Open the new current step to see the assigned action.

  • Submitted → Return for amendment

    HSE Manager / Operations / Action Owner / Organization Administrator / Safety and Health Officer.

    Enter the reason for the decision. After confirmation the record moves to Returned.

    Next eligible roles · Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Submitted → Review

    HSE Manager / Operations / Action Owner / Organization Administrator / Safety and Health Officer.

    Complete the declaration. After confirmation the record moves to Reviewed.

    Next eligible roles · Independent Verifier / Management Approver / Manager / Independent Reviewer / Organization Administrator. Open the new current step to see the assigned action.

Desktop · Inspections
Desktop · Inspections
Mobile · Inspections
Mobile · Inspections
Inspections
Inspections
Workspace route after sign-in/workspace/safety/inspections
Mobile path
  1. Tap Safety in the bottom navigation, or tap More to open the module picker.
  2. Use search in the module picker, then select Inspections.
  3. On the register, tap Open Workspace for the record or use New only when your role allows it.
Controlled-record rule

Hard delete is never the normal lifecycle for a controlled record. Once used, submitted, approved, linked, printed or evidenced, use amendment, revision, void, retirement, archive or supersede with a reason.

06 SAFETYBehavior-Based SafetyRecord safe and at-risk behavior, coaching and recurring behavior patterns.

Working steps

  1. Create the record; saving opens its workspace directly. Amend only while your role and current status permit it.
  2. Capture the controlled particulars: Organization Unit, Title, Description, Observation type.
  3. Add source-specific retained details, evidence and location where applicable.
  4. Follow Current step and the visible permitted action. Related tabs are grouped when needed; open Review & records for workflow, evidence and history. Independent review, approval and required evidence still apply.

Authorized role examples

Reporter, Supervisor, Safety Officer, HSE Manager, Investigator, Action Owner and Independent Verifier. Roles must be active and scoped to the relevant organization unit.

Example scenario

Example: A site needs to record safe and at-risk behavior, coaching and recurring behavior patterns The authorized user opens Behavior-Based Safety, completes the controlled record and follows the required workflow.

Before you start

Open Behavior-Based Safety in your signed-in workspace.

Standard package access · Essential, Professional, Enterprise. Your assigned permissions, site scope and any active promotion also apply.

Required form details · Organization Unit, Title, Description, Observation type, Behavior category, Location, Observed at.

Actions by status and role

These examples use the training workflows. Check the current step on your own record for the available decisions.

  • Approved → Close

    Independent Verifier / Management Approver / Organization Administrator.

    Complete the declaration. After confirmation the record moves to Closed.

    Next eligible roles · Independent Verifier / Management Approver / Organization Administrator. Open the new current step to see the assigned action.

  • Closed → Archive

    Independent Verifier / Management Approver / Organization Administrator.

    Enter the reason for the decision. Complete the declaration. After confirmation the record moves to Archived.
  • Closed → Reopen

    Independent Verifier / Management Approver / Organization Administrator.

    Enter the reason for the decision. After confirmation the record moves to Draft.

    Next eligible roles · Organization Administrator / Safety and Health Officer / Worker Reporter. Open the new current step to see the assigned action.

  • Draft → Submit

    Organization Administrator / Safety and Health Officer / Worker Reporter.

    Complete the declaration. After confirmation the record moves to Submitted.

    Next eligible roles · HSE Manager / Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Rejected → Archive rejected record

    Independent Verifier / Management Approver / Organization Administrator.

    Enter the reason for the decision. Complete the declaration. After confirmation the record moves to Archived.
  • Returned → Amend and resubmit

    Organization Administrator / Safety and Health Officer / Worker Reporter.

    Complete the declaration. After confirmation the record moves to Draft.

    Next eligible roles · Organization Administrator / Safety and Health Officer / Worker Reporter. Open the new current step to see the assigned action.

  • Reviewed → Approve

    Independent Verifier / Management Approver / Organization Administrator.

    Complete the declaration. After confirmation the record moves to Approved.

    Next eligible roles · Independent Verifier / Management Approver / Organization Administrator. Open the new current step to see the assigned action.

  • Reviewed → Reject

    Independent Verifier / Management Approver / Organization Administrator.

    Enter the reason for the decision. After confirmation the record moves to Rejected.

    Next eligible roles · Independent Verifier / Management Approver / Organization Administrator. Open the new current step to see the assigned action.

  • Submitted → Return for amendment

    HSE Manager / Organization Administrator / Safety and Health Officer.

    Enter the reason for the decision. After confirmation the record moves to Returned.

    Next eligible roles · Organization Administrator / Safety and Health Officer / Worker Reporter. Open the new current step to see the assigned action.

  • Submitted → Review

    HSE Manager / Organization Administrator / Safety and Health Officer.

    Complete the declaration. After confirmation the record moves to Reviewed.

    Next eligible roles · Independent Verifier / Management Approver / Organization Administrator. Open the new current step to see the assigned action.

Desktop · Behavior-Based Safety
Desktop · Behavior-Based Safety
Mobile · Behavior-Based Safety
Mobile · Behavior-Based Safety
Workspace route after sign-in/workspace/safety/behavior-safety
Mobile path
  1. Tap Safety in the bottom navigation, or tap More to open the module picker.
  2. Use search in the module picker, then select Behavior-Based Safety.
  3. On the register, tap Open Workspace for the record or use New only when your role allows it.
Controlled-record rule

Hard delete is never the normal lifecycle for a controlled record. Once used, submitted, approved, linked, printed or evidenced, use amendment, revision, void, retirement, archive or supersede with a reason.

07 SAFETYReport EventReport an incident, near miss, unsafe condition or occupational event with evidence and location.

Working steps

  1. Open Report an event on the landing page. Guests open the form directly. Use the Language selector for English or Bahasa Malaysia; signed-in users use the workspace language selector.
  2. Step 1: attach up to six JPG/PNG photographs, capture GPS or place a location pin, and describe the event. A photograph is required where the organization enables that rule. Camera retakes replace the previous camera image; uploads are added to the current photos.
  3. Step 2: select the event type and severity, then record immediate action and any repeat-event or stop-work flags. Complete the required fields before selecting Next.
  4. Step 3: select the organization unit or leave Unknown if unsure. Starter allows reporting anywhere without a geofence. Other packages use the main organization geofence when the unit is Unknown. Continue as guest and enter your identification (MyKad, Student ID, Employee ID or Passport) and contact details, or select Log in to open the popup. Successful login restores the photos and draft at step 3 and prefills readonly identity from your account. A failed or cancelled login keeps the report; your account must have active membership in the selected organization.
  5. Step 4: review the summary, photographs, identity and location map. Use Back to correct details; changes require a fresh declaration. Starter retains location/GPS evidence without a geofence restriction. For other packages, the server checks the selected organization/unit geofence and its configured tolerance on submission. Correct a rejected location or scope before retrying.
  6. Save offline draft stores data and photos in this browser on this device. Keep the loaded form open while offline. Reopening or refreshing the form, signing in and submitting require a connection; an offline refresh can show the offline page until you reconnect. Wait for the saved message. After restoring a draft, review it and tick the declaration again.
  7. Select Submit & print once. The server assigns the reference and returns a PDF receipt. If a connection fails, retry the same draft to retain the same submission identifier. A saved draft has no event reference until accepted. If the security session expires, follow the refresh or login message without starting another report.
  8. If the PDF download is blocked or fails, use Download PDF receipt on the confirmation page, then print the PDF. Keep the reference and status link; a PDF-download failure does not cancel the accepted report. The Event Case workspace owns all follow-up.
  9. After acceptance, an acknowledgement email is sent to the guest contact email or signed-in account email. It contains the reference and Check report status link. Guests can also use Check report status on the landing page with their reference and identification number. If the email is delayed, keep the confirmation page or PDF; do not submit a new report just to get another email.

Authorized role examples

Any authenticated organization user; public guest reporting is available only where enabled by the organization.

Example scenario

A technician sees an unsecured cable route. They submit an unsafe-condition report with a photo, GPS and immediate barricade action; the safety team then owns the Event Case follow-up.

Before you start

Open Report Event in your signed-in workspace.

Standard package access · Starter, Essential, Professional, Enterprise. Your assigned permissions, site scope and any active promotion also apply.

Required form details · Organization Unit, Title, Description, Report category, Event type, Actual or potential severity, Location, Occurred at.

Actions by status and role

These examples use the training workflows. Check the current step on your own record for the available decisions.

  • Action In Progress → Submit Event for verification

    Investigator / Organization Administrator / Safety and Health Officer.

    Complete the declaration. After confirmation the record moves to Pending Verification.

    Next eligible roles · Independent Verifier / Manager / Independent Reviewer / Organization Administrator. Open the new current step to see the assigned action.

  • Closed → Archive Event

    Management Approver / Organization Administrator.

    Enter the reason for the decision. Complete the declaration. After confirmation the record moves to Archived.
  • Closed → Reopen Event

    Management Approver / Manager / Independent Reviewer / Organization Administrator.

    Enter the reason for the decision. After confirmation the record moves to Triaged.

    Next eligible roles · HSE Manager / Organization Administrator / Safety and Health Officer / Investigator. Open the new current step to see the assigned action.

  • Draft → Report event

    Employee / Manager / Independent Reviewer / Operations / Action Owner / Organization Administrator / Safety and Health Officer / Worker Reporter.

    Complete the declaration. After confirmation the record moves to Submitted.

    Next eligible roles · HSE Manager / Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Pending Verification → Independent verification

    Independent Verifier / Manager / Independent Reviewer / Organization Administrator.

    Attach the required evidence. Complete the declaration. After confirmation the record moves to Verified.

    Next eligible roles · Management Approver / Manager / Independent Reviewer / Organization Administrator. Open the new current step to see the assigned action.

  • Pending Verification → Return actions for rework

    Independent Verifier / Manager / Independent Reviewer / Organization Administrator.

    Enter the reason for the decision. After confirmation the record moves to Action In Progress.

    Next eligible roles · Investigator / Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Returned → Amend report

    Employee / Manager / Independent Reviewer / Operations / Action Owner / Organization Administrator / Safety and Health Officer / Worker Reporter.

    Complete the declaration. After confirmation the record moves to Draft.

    Next eligible roles · Employee / Manager / Independent Reviewer / Operations / Action Owner / Organization Administrator / Safety and Health Officer / Worker Reporter. Open the new current step to see the assigned action.

  • Submitted → Complete triage

    HSE Manager / Organization Administrator / Safety and Health Officer.

    Complete the declaration. After confirmation the record moves to Triaged.

    Next eligible roles · HSE Manager / Organization Administrator / Safety and Health Officer / Investigator. Open the new current step to see the assigned action.

  • Submitted → Reject invalid report

    HSE Manager / Organization Administrator / Safety and Health Officer.

    Enter the reason for the decision. After confirmation the record moves to Rejected.
  • Submitted → Return for amendment

    HSE Manager / Organization Administrator / Safety and Health Officer.

    Enter the reason for the decision. After confirmation the record moves to Returned.

    Next eligible roles · Employee / Manager / Independent Reviewer / Operations / Action Owner / Organization Administrator / Safety and Health Officer / Worker Reporter. Open the new current step to see the assigned action.

  • Triaged → Record only and submit for verification

    HSE Manager / Organization Administrator / Safety and Health Officer.

    Complete the declaration. After confirmation the record moves to Pending Verification.

    Next eligible roles · Independent Verifier / Manager / Independent Reviewer / Organization Administrator. Open the new current step to see the assigned action.

  • Triaged → Reject triaged Event

    HSE Manager / Organization Administrator / Safety and Health Officer.

    Enter the reason for the decision. After confirmation the record moves to Rejected.
  • Triaged → Return triaged Event for amendment

    HSE Manager / Organization Administrator / Safety and Health Officer.

    Enter the reason for the decision. After confirmation the record moves to Returned.

    Next eligible roles · Employee / Manager / Independent Reviewer / Operations / Action Owner / Organization Administrator / Safety and Health Officer / Worker Reporter. Open the new current step to see the assigned action.

  • Triaged → Route direct CAPA

    HSE Manager / Organization Administrator / Safety and Health Officer.

    Complete the declaration. After confirmation the record moves to Action In Progress.

    Next eligible roles · Investigator / Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Triaged → Route other follow-up

    HSE Manager / Organization Administrator / Safety and Health Officer.

    Complete the declaration. After confirmation the record moves to Action In Progress.

    Next eligible roles · Investigator / Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Triaged → Start assigned investigation

    Investigator / Organization Administrator.

    Complete the declaration. After confirmation the record moves to Under Investigation.

    Next eligible roles · Investigator / Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Under Investigation → Complete investigation without follow-up

    Investigator / Organization Administrator.

    Attach the required evidence. Complete the declaration. After confirmation the record moves to Pending Verification.

    Next eligible roles · Independent Verifier / Manager / Independent Reviewer / Organization Administrator. Open the new current step to see the assigned action.

  • Under Investigation → Route investigation follow-up

    Investigator / Organization Administrator / Safety and Health Officer.

    Complete the declaration. After confirmation the record moves to Action In Progress.

    Next eligible roles · Investigator / Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Verified → Approve closure

    Management Approver / Manager / Independent Reviewer / Organization Administrator.

    Complete the declaration. After confirmation the record moves to Closed.

    Next eligible roles · Management Approver / Organization Administrator / Manager / Independent Reviewer. Open the new current step to see the assigned action.

Desktop · Log in to HSE.my
Desktop · Log in to HSE.my
Mobile · Log in to HSE.my
Mobile · Log in to HSE.my
Workspace route after sign-in/workspace/safety/report-event
Mobile path
  1. Tap Safety in the bottom navigation, or tap More to open the module picker.
  2. Use search in the module picker, then select Report Event.
  3. On the register, tap Open Workspace for the record or use New only when your role allows it.
Controlled-record rule

Hard delete is never the normal lifecycle for a controlled record. Once used, submitted, approved, linked, printed or evidenced, use amendment, revision, void, retirement, archive or supersede with a reason.

08 SAFETYEvent RegisterOrganization-bound register of every reported safety event.

Working steps

  1. Search, filter and open the controlled records available to your organization-unit scope.
  2. Use Open Workspace to view details, related records, evidence, workflow history and permitted follow-up.
  3. Use the owning workspace for amendments and workflow decisions. For printing, choose Print / PDF on the right of its header, then the document / format if several are offered.

Authorized role examples

Reporter, Supervisor, Safety Officer, HSE Manager, Investigator, Action Owner and Independent Verifier. Roles must be active and scoped to the relevant organization unit.

Example scenario

Example: A site needs to organization-bound register of every reported safety event The authorized user opens Event Register, completes the controlled record and follows the required workflow.

Before you start

Open Event Register in your signed-in workspace.

Standard package access · Starter, Essential, Professional, Enterprise. Your assigned permissions, site scope and any active promotion also apply.

Actions by status and role

These examples use the training workflows. Check the current step on your own record for the available decisions.

  • Action In Progress → Submit Event for verification

    Investigator / Organization Administrator / Safety and Health Officer.

    Complete the declaration. After confirmation the record moves to Pending Verification.

    Next eligible roles · Independent Verifier / Manager / Independent Reviewer / Organization Administrator. Open the new current step to see the assigned action.

  • Closed → Archive Event

    Management Approver / Organization Administrator.

    Enter the reason for the decision. Complete the declaration. After confirmation the record moves to Archived.
  • Closed → Reopen Event

    Management Approver / Manager / Independent Reviewer / Organization Administrator.

    Enter the reason for the decision. After confirmation the record moves to Triaged.

    Next eligible roles · HSE Manager / Organization Administrator / Safety and Health Officer / Investigator. Open the new current step to see the assigned action.

  • Draft → Report event

    Employee / Manager / Independent Reviewer / Operations / Action Owner / Organization Administrator / Safety and Health Officer / Worker Reporter.

    Complete the declaration. After confirmation the record moves to Submitted.

    Next eligible roles · HSE Manager / Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Pending Verification → Independent verification

    Independent Verifier / Manager / Independent Reviewer / Organization Administrator.

    Attach the required evidence. Complete the declaration. After confirmation the record moves to Verified.

    Next eligible roles · Management Approver / Manager / Independent Reviewer / Organization Administrator. Open the new current step to see the assigned action.

  • Pending Verification → Return actions for rework

    Independent Verifier / Manager / Independent Reviewer / Organization Administrator.

    Enter the reason for the decision. After confirmation the record moves to Action In Progress.

    Next eligible roles · Investigator / Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Returned → Amend report

    Employee / Manager / Independent Reviewer / Operations / Action Owner / Organization Administrator / Safety and Health Officer / Worker Reporter.

    Complete the declaration. After confirmation the record moves to Draft.

    Next eligible roles · Employee / Manager / Independent Reviewer / Operations / Action Owner / Organization Administrator / Safety and Health Officer / Worker Reporter. Open the new current step to see the assigned action.

  • Submitted → Complete triage

    HSE Manager / Organization Administrator / Safety and Health Officer.

    Complete the declaration. After confirmation the record moves to Triaged.

    Next eligible roles · HSE Manager / Organization Administrator / Safety and Health Officer / Investigator. Open the new current step to see the assigned action.

  • Submitted → Reject invalid report

    HSE Manager / Organization Administrator / Safety and Health Officer.

    Enter the reason for the decision. After confirmation the record moves to Rejected.
  • Submitted → Return for amendment

    HSE Manager / Organization Administrator / Safety and Health Officer.

    Enter the reason for the decision. After confirmation the record moves to Returned.

    Next eligible roles · Employee / Manager / Independent Reviewer / Operations / Action Owner / Organization Administrator / Safety and Health Officer / Worker Reporter. Open the new current step to see the assigned action.

  • Triaged → Record only and submit for verification

    HSE Manager / Organization Administrator / Safety and Health Officer.

    Complete the declaration. After confirmation the record moves to Pending Verification.

    Next eligible roles · Independent Verifier / Manager / Independent Reviewer / Organization Administrator. Open the new current step to see the assigned action.

  • Triaged → Reject triaged Event

    HSE Manager / Organization Administrator / Safety and Health Officer.

    Enter the reason for the decision. After confirmation the record moves to Rejected.
  • Triaged → Return triaged Event for amendment

    HSE Manager / Organization Administrator / Safety and Health Officer.

    Enter the reason for the decision. After confirmation the record moves to Returned.

    Next eligible roles · Employee / Manager / Independent Reviewer / Operations / Action Owner / Organization Administrator / Safety and Health Officer / Worker Reporter. Open the new current step to see the assigned action.

  • Triaged → Route direct CAPA

    HSE Manager / Organization Administrator / Safety and Health Officer.

    Complete the declaration. After confirmation the record moves to Action In Progress.

    Next eligible roles · Investigator / Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Triaged → Route other follow-up

    HSE Manager / Organization Administrator / Safety and Health Officer.

    Complete the declaration. After confirmation the record moves to Action In Progress.

    Next eligible roles · Investigator / Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Triaged → Start assigned investigation

    Investigator / Organization Administrator.

    Complete the declaration. After confirmation the record moves to Under Investigation.

    Next eligible roles · Investigator / Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Under Investigation → Complete investigation without follow-up

    Investigator / Organization Administrator.

    Attach the required evidence. Complete the declaration. After confirmation the record moves to Pending Verification.

    Next eligible roles · Independent Verifier / Manager / Independent Reviewer / Organization Administrator. Open the new current step to see the assigned action.

  • Under Investigation → Route investigation follow-up

    Investigator / Organization Administrator / Safety and Health Officer.

    Complete the declaration. After confirmation the record moves to Action In Progress.

    Next eligible roles · Investigator / Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Verified → Approve closure

    Management Approver / Manager / Independent Reviewer / Organization Administrator.

    Complete the declaration. After confirmation the record moves to Closed.

    Next eligible roles · Management Approver / Organization Administrator / Manager / Independent Reviewer. Open the new current step to see the assigned action.

Desktop · Record actual and potential severity
Desktop · Record actual and potential severity
Mobile · Record actual and potential severity
Mobile · Record actual and potential severity
Desktop · Review decision and case requirements
Desktop · Review decision and case requirements
Mobile · Review decision and case requirements
Mobile · Review decision and case requirements
Desktop · Create linked investigation
Desktop · Create linked investigation
Mobile · Create linked investigation
Mobile · Create linked investigation
Desktop · Create linked CAPA
Desktop · Create linked CAPA
Mobile · Create linked CAPA
Mobile · Create linked CAPA
Desktop · Prepare closure verification
Desktop · Prepare closure verification
Mobile · Prepare closure verification
Mobile · Prepare closure verification
Desktop · Record closure sign-off
Desktop · Record closure sign-off
Mobile · Record closure sign-off
Mobile · Record closure sign-off
Workspace route after sign-in/workspace/safety/event-register
Mobile path
  1. Tap Safety in the bottom navigation, or tap More to open the module picker.
  2. Use search in the module picker, then select Event Register.
  3. On the register, tap Open Workspace for the record or use New only when your role allows it.
Controlled-record rule

This register is a controlled entry point/history view. Use the designated workspace to create or maintain the source record.

09 SAFETYIncident and InvestigationEstablish facts, causal factors, root causes and lessons learned.

Working steps

  1. Open the related Event Case and establish facts, chronology, causes, findings and lessons learned.
  2. Link affected JSA steps/controls and request review where a persistent risk is identified.
  3. Create or link CAPA; investigation never replaces CAPA as the action workflow.

Authorized role examples

Reporter, Supervisor, Safety Officer, HSE Manager, Investigator, Action Owner and Independent Verifier. Roles must be active and scoped to the relevant organization unit.

Example scenario

Example: A site needs to establish facts, causal factors, root causes and lessons learned The authorized user opens Incident and Investigation, completes the controlled record and follows the required workflow.

Before you start

Open Incident and Investigation in your signed-in workspace.

Standard package access · Starter, Essential, Professional, Enterprise. Your assigned permissions, site scope and any active promotion also apply.

Required form details · Organization Unit, Title, Description, Safety event, Method, Lead investigator, Started on, Investigation status.

Actions by status and role

These examples use the training workflows. Check the current step on your own record for the available decisions.

  • Approved → Close investigation

    Management Approver / Manager / Independent Reviewer / Organization Administrator.

    Complete the declaration. After confirmation the record moves to Closed.

    Next eligible roles · Management Approver / Organization Administrator / Manager / Independent Reviewer. Open the new current step to see the assigned action.

  • Closed → Archive investigation

    Management Approver / Organization Administrator.

    Enter the reason for the decision. Complete the declaration. After confirmation the record moves to Archived.
  • Closed → Reopen investigation

    Management Approver / Manager / Independent Reviewer / Organization Administrator.

    Enter the reason for the decision. After confirmation the record moves to In Progress.

    Next eligible roles · Investigator / Organization Administrator. Open the new current step to see the assigned action.

  • Completed → Approve findings

    HSE Manager / Management Approver / Manager / Independent Reviewer / Organization Administrator.

    Complete the declaration. After confirmation the record moves to Approved.

    Next eligible roles · Management Approver / Manager / Independent Reviewer / Organization Administrator. Open the new current step to see the assigned action.

  • Completed → Return findings

    HSE Manager / Manager / Independent Reviewer / Organization Administrator.

    Enter the reason for the decision. After confirmation the record moves to In Progress.

    Next eligible roles · Investigator / Organization Administrator. Open the new current step to see the assigned action.

  • Draft → Submit investigation plan

    Investigator / Organization Administrator.

    Complete the declaration. After confirmation the record moves to Submitted.

    Next eligible roles · HSE Manager / Organization Administrator / Safety and Health Officer / Investigator. Open the new current step to see the assigned action.

  • In Progress → Complete investigation

    Investigator / Organization Administrator.

    Attach the required evidence. Complete the declaration. After confirmation the record moves to Completed.

    Next eligible roles · HSE Manager / Management Approver / Manager / Independent Reviewer / Organization Administrator. Open the new current step to see the assigned action.

  • Returned → Amend plan

    Investigator / Organization Administrator.

    Complete the declaration. After confirmation the record moves to Draft.

    Next eligible roles · Investigator / Organization Administrator. Open the new current step to see the assigned action.

  • Submitted → Return plan

    HSE Manager / Organization Administrator / Safety and Health Officer.

    Enter the reason for the decision. After confirmation the record moves to Returned.

    Next eligible roles · Investigator / Organization Administrator. Open the new current step to see the assigned action.

  • Submitted → Start investigation

    Investigator / Organization Administrator.

    Complete the declaration. After confirmation the record moves to In Progress.

    Next eligible roles · Investigator / Organization Administrator. Open the new current step to see the assigned action.

Desktop · Incident and Investigation
Desktop · Incident and Investigation
Mobile · Incident and Investigation
Mobile · Incident and Investigation
Workspace route after sign-in/workspace/safety/investigations
Mobile path
  1. Tap Safety in the bottom navigation, or tap More to open the module picker.
  2. Use search in the module picker, then select Incident and Investigation.
  3. On the register, tap Open Workspace for the record or use New only when your role allows it.
Controlled-record rule

Hard delete is never the normal lifecycle for a controlled record. Once used, submitted, approved, linked, printed or evidenced, use amendment, revision, void, retirement, archive or supersede with a reason.

10 SAFETYCorrective and Preventive ActionAssign, implement and independently verify corrective and preventive actions.

Working steps

  1. Assign a corrective, preventive or containment action to an accountable owner and due date.
  2. The assigned owner adds evidence, records implementation and may confirm Save & send for verification in the same form. Save implementation alone keeps the current workflow status.
  3. A different authorized verifier records effectiveness and may confirm Save & verify effectiveness. A failed workflow check keeps saved findings available and displays the issue. Final closure still uses the permitted independent decision.
  4. Choose Print / PDF on the right of the header to print or re-print the controlled CAPA summary and retain linked-source traceability.

Authorized role examples

CAPA Creator, Action Owner, HSE Manager and an Independent Effectiveness Verifier.

Example scenario

Example: A site needs to assign, implement and independently verify corrective and preventive actions The authorized user opens Corrective and Preventive Action, completes the controlled record and follows the required workflow.

Before you start

Open Corrective and Preventive Action in your signed-in workspace.

Standard package access · Starter, Essential, Professional, Enterprise. Your assigned permissions, site scope and any active promotion also apply.

Required form details · Organization Unit, Title, Description, Source record, Action type, Action owner, Due date.

Actions by status and role

These examples use the training workflows. Check the current step on your own record for the available decisions.

  • Approved → Close CAPA

    Management Approver / Manager / Independent Reviewer / Organization Administrator.

    Complete the declaration. After confirmation the record moves to Closed.

    Next eligible roles · Management Approver / Organization Administrator / Manager / Independent Reviewer. Open the new current step to see the assigned action.

  • Closed → Archive CAPA

    Management Approver / Organization Administrator.

    Enter the reason for the decision. Complete the declaration. After confirmation the record moves to Archived.
  • Closed → Reopen CAPA

    Management Approver / Manager / Independent Reviewer / Organization Administrator.

    Enter the reason for the decision. After confirmation the record moves to In Progress.

    Next eligible roles · Action Owner / Operations / Action Owner / Organization Administrator. Open the new current step to see the assigned action.

  • Draft → Submit CAPA

    Investigator / Organization Administrator / Safety and Health Officer.

    Complete the declaration. After confirmation the record moves to Submitted.

    Next eligible roles · Action Owner / Operations / Action Owner / Organization Administrator. Open the new current step to see the assigned action.

  • In Progress → Submit implementation

    Action Owner / Operations / Action Owner / Organization Administrator.

    Attach the required evidence. Complete the declaration. After confirmation the record moves to Pending Verification.

    Next eligible roles · Independent Verifier / Manager / Independent Reviewer / Organization Administrator. Open the new current step to see the assigned action.

  • Pending Verification → Return for rework

    Independent Verifier / Manager / Independent Reviewer / Organization Administrator.

    Enter the reason for the decision. After confirmation the record moves to In Progress.

    Next eligible roles · Action Owner / Operations / Action Owner / Organization Administrator. Open the new current step to see the assigned action.

  • Pending Verification → Verify effectiveness

    Independent Verifier / Manager / Independent Reviewer / Organization Administrator.

    Attach the required evidence. Complete the declaration. After confirmation the record moves to Approved.

    Next eligible roles · Management Approver / Manager / Independent Reviewer / Organization Administrator. Open the new current step to see the assigned action.

  • Returned → Amend CAPA

    Investigator / Organization Administrator / Safety and Health Officer.

    Complete the declaration. After confirmation the record moves to Draft.

    Next eligible roles · Investigator / Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Submitted → Accept action

    Action Owner / Operations / Action Owner / Organization Administrator.

    Complete the declaration. After confirmation the record moves to In Progress.

    Next eligible roles · Action Owner / Operations / Action Owner / Organization Administrator. Open the new current step to see the assigned action.

  • Submitted → Return CAPA

    Action Owner / Operations / Action Owner / Organization Administrator.

    Enter the reason for the decision. After confirmation the record moves to Returned.

    Next eligible roles · Investigator / Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

Desktop · Corrective and Preventive Action
Desktop · Corrective and Preventive Action
Mobile · Corrective and Preventive Action
Mobile · Corrective and Preventive Action
Capa evidence
Capa evidence
Workspace route after sign-in/workspace/safety/capa
Mobile path
  1. Tap Safety in the bottom navigation, or tap More to open the module picker.
  2. Use search in the module picker, then select Corrective and Preventive Action.
  3. On the register, tap Open Workspace for the record or use New only when your role allows it.
Controlled-record rule

Hard delete is never the normal lifecycle for a controlled record. Once used, submitted, approved, linked, printed or evidenced, use amendment, revision, void, retirement, archive or supersede with a reason.

11 SAFETYSafety CultureRun governed surveys measuring commitment, reporting, trust, communication and participation.

Working steps

  1. Create the record; saving opens its workspace directly. Amend only while your role and current status permit it.
  2. Capture the controlled particulars: Organization Unit, Title, Description, Opens on.
  3. Add source-specific retained details, evidence and location where applicable.
  4. Follow Current step and the visible permitted action. Related tabs are grouped when needed; open Review & records for workflow, evidence and history. Independent review, approval and required evidence still apply.

Authorized role examples

Reporter, Supervisor, Safety Officer, HSE Manager, Investigator, Action Owner and Independent Verifier. Roles must be active and scoped to the relevant organization unit.

Example scenario

Example: A site needs to run governed surveys measuring commitment, reporting, trust, communication and participation The authorized user opens Safety Culture, completes the controlled record and follows the required workflow.

Before you start

Open Safety Culture in your signed-in workspace.

Standard package access · Essential, Professional, Enterprise. Your assigned permissions, site scope and any active promotion also apply.

Required form details · Organization Unit, Title, Description, Opens on, Closes on.

Actions by status and role

These examples use the training workflows. Check the current step on your own record for the available decisions.

  • Approved → Close

    Independent Verifier / Management Approver / Organization Administrator.

    Complete the declaration. After confirmation the record moves to Closed.

    Next eligible roles · Independent Verifier / Management Approver / Organization Administrator. Open the new current step to see the assigned action.

  • Closed → Archive

    Independent Verifier / Management Approver / Organization Administrator.

    Enter the reason for the decision. Complete the declaration. After confirmation the record moves to Archived.
  • Closed → Reopen

    Independent Verifier / Management Approver / Organization Administrator.

    Enter the reason for the decision. After confirmation the record moves to Draft.

    Next eligible roles · Organization Administrator / Safety and Health Officer / Worker Reporter. Open the new current step to see the assigned action.

  • Draft → Submit

    Organization Administrator / Safety and Health Officer / Worker Reporter.

    Complete the declaration. After confirmation the record moves to Submitted.

    Next eligible roles · HSE Manager / Organization Administrator / Safety and Health Officer. Open the new current step to see the assigned action.

  • Rejected → Archive rejected record

    Independent Verifier / Management Approver / Organization Administrator.

    Enter the reason for the decision. Complete the declaration. After confirmation the record moves to Archived.
  • Returned → Amend and resubmit

    Organization Administrator / Safety and Health Officer / Worker Reporter.

    Complete the declaration. After confirmation the record moves to Draft.

    Next eligible roles · Organization Administrator / Safety and Health Officer / Worker Reporter. Open the new current step to see the assigned action.

  • Reviewed → Approve

    Independent Verifier / Management Approver / Organization Administrator.

    Complete the declaration. After confirmation the record moves to Approved.

    Next eligible roles · Independent Verifier / Management Approver / Organization Administrator. Open the new current step to see the assigned action.

  • Reviewed → Reject

    Independent Verifier / Management Approver / Organization Administrator.

    Enter the reason for the decision. After confirmation the record moves to Rejected.

    Next eligible roles · Independent Verifier / Management Approver / Organization Administrator. Open the new current step to see the assigned action.

  • Submitted → Return for amendment

    HSE Manager / Organization Administrator / Safety and Health Officer.

    Enter the reason for the decision. After confirmation the record moves to Returned.

    Next eligible roles · Organization Administrator / Safety and Health Officer / Worker Reporter. Open the new current step to see the assigned action.

  • Submitted → Review

    HSE Manager / Organization Administrator / Safety and Health Officer.

    Complete the declaration. After confirmation the record moves to Reviewed.

    Next eligible roles · Independent Verifier / Management Approver / Organization Administrator. Open the new current step to see the assigned action.

Desktop · Safety Culture
Desktop · Safety Culture
Mobile · Safety Culture
Mobile · Safety Culture
Workspace route after sign-in/workspace/safety/culture
Mobile path
  1. Tap Safety in the bottom navigation, or tap More to open the module picker.
  2. Use search in the module picker, then select Safety Culture.
  3. On the register, tap Open Workspace for the record or use New only when your role allows it.
Controlled-record rule

Hard delete is never the normal lifecycle for a controlled record. Once used, submitted, approved, linked, printed or evidenced, use amendment, revision, void, retirement, archive or supersede with a reason.

NEED HELP?

Share the record reference, workspace URL and displayed error reference.

Do not include restricted medical, identity or personal data in a support request.

Open HSE.my sign in →